Peopoly 光造形レーザーSLA 3DプリンターMOAI用 ネックスレジン(グレーHitemp） １KG
■グレー
■1KG
■波長：405nm
■対応機種： 光造形レーザーSLA方式 プリンター（Form2,MOAIなど）
■高硬度
■ハイディテール
■低収縮
■滑らかな表面
■ Easy on the PDMS layer
■ペーパー・塗装可能
■高温Hitemp対応：180 C / 356F
■Viscosity (cps at 25c) 550-600
■Liquid Density (g/cm3) 1.14
■Hardness (Shore D) 82
■Tensile Strength at Break (Mpa) 62
■Elongation at Break (%) 9
■Young’s Modulus (MPa) 1000
■Laser Power Recommendation: Grey and Flesh 51 Clear 53-54
■Recommended Printing temperature (resin): 30 Celsius
■Recommended Layer Height = 60-100um. many pro shops print at 100um for quicker print and workflow
■Profiles: Standard Profiles in Asura would work fine for this resin.
■System setting: Default firmware settings for v1.18
■Cleaning - Use 95%+ Ethanol or IPA and painter brush to clean
■Curing - Ideal curing is to have a heated chamber of 30 Celsius and 6W+ 405nm LED like Peopoly UV LED to cure for 10 minutes
